TruDesign Aquavalve - Manual 138741

The TruDesign Aquavalve is the most versatile valve on the market today. The Aquavalve is designed for demanding marine sanitation applications. The Aquavalve is typically used in marine toilet applications where protection for the environment necessitates the need to control effluent discharge – in many countries this is governed by regulation. The effluent can be held in a holding tank for later discharge overboard or to a shore side facility. The TruDesign Aquavalve is moulded from a glass reinforced nylon composite. High strength, high-modulus glass fibres impregnated into the nylon provides dramatic strength, stiffness, toughness, and dimensional stability. The Aquavalve is a diverting valve. The rotor seal is designed to operate under low pressure, and therefore may not be suitable for vacuum toilets depending on the position of the valve relative to the toilet see 138760 for selection of tails.